The best regular & cabinet door painting system that will give an excellent horizontally sprayed loaded up a smooth finish

We ship within 24 hours 

 Toll free: (877)-331-RACK (7225)

best@doorrackpainter.com

Using the Door Rack Painter - 30 Door Dry Rack

Incredible space saver, this method of stacking improves labor costs for painting contractors and cabinet refinishers.

    • Store 30 doors wet on both sides using the aluminum rods
    • Strong aluminum rods are bent at an angle that minimizes contact
    • Adjustable, place any cabinet door up the width of 36″
    • Using the wood rod shelves add-on (additional item purchase required) – capable of spraying the final coat on one side (for glossy and enamel finishes): Store 50-70 cabinet doors painted on one side Store 15 regular hollow doors up to 30 lbs and 36″ wide each painted on one side, wooden dowels allow for easy rolling on action Store baseboards & more with (2) 30 Door Dry Racks using the wooden rod add-ons
20180628_181416
30 Door Dry Rack

The 30 Door Dry Rack includes

  • Four rack poles 
  • Six base pieces
  • Four wheels
  • Two 1/4″ x 1-3/4″ screws with nuts
  • Six 3/8″ x 3″ screws with nuts
  • Eight 3/8″ x 2″ screws with nuts
  • Eight 3/8″ x 2″ screws with wingnuts 
  • Fourteen 3/8″ washers
  • Fourteen 3/8″ bolts with nuts
  • Two small & 2 big sets of cabinet door grip holders
  • 122 Aluminum rods with red and black plastic caps for the dry rack. (Caps hold the rods in place

Both sides! Save time & space

• Take the cabinet door grip holder in to your hands and hold them on an angle on both edges of the door.

• From here you transport the door painted on both sides to the dry rack.

This method works excellent for cabinet doors.

You will be able to apply a perfect finish on both sides and transport them without disturbing the wet paint.

Wooden rod shelves add-on ready

The racks come pre-drilled for the installation of the wooden rod shelves add-on, which increases the capability of the rack by storing 15 regular sized doors or 50-70 cabinet doors on one side)

Purchase of the wooden rod shelves add-on is required.

Using the Door Rack Painter

• There is minimum contact on the edge of the door, enabling both sides to be painted and stored without disturbing the wet paint.

• Depending on the corners of the cabinet doors you could have a little spot on the edge that can easily be touched up.

• But our experience is that if we apply one coat of primer and two coats of finish enamel paint, most of the edges are free of spots and again if there are any left they can be very easily touched up.

• Spraying clear lacquer or clear polyurethane will not show any spots.

Setting the width before spraying the doors:

There are three different settings for the 30 Door Dry Rack. Farthest apart, medium and very close for drawers. 

The rods allow for 10” difference in individual cabinet and drawer width, it can be adjusted by pulling in and out the rods.

Small doors or drawers

Medium sized cabinet doors

Medium sized cabinet doors

Transporting the doors with grip holders:

Transport the wet cabinet doors as above, holding them at at a 45 degree angle. Ater one coat of primer and 2 coats of satin, the markings are minimal if any, if there are any markings they can be fixed by tapping with a chip or foam brush.

For cabinet doors

• Spraying clear lacquer or clear polyurethane will not show any spots.

• Spray the backside of any cabinet door first with a nice but not too heavy of a coat, but don’t paint the sides yet:

• Turn the door by yourself or with a partner by just simply holding onto the sides

• Paint the top and the front side of the cabinet door as heavy as you like.

Wooden Rods Shelves Add-on

With wood rod shelves addon – adds the capability to spray the final coat on one side (for glossy and enamel finishes):

  • Store 50-70 cabinet doors painted on one side
  • Store 15 regular hollow doors up to 30 lbs and 36″ wide each painted on one side, wooden dowels allow for smooth rolling on action
  • Store 100 baseboards or crown moldings (2) 30 Door Dry Racks using the wooden rod add-on

Purchase of the wooden rod shelves add-on is required.

The Wooden Rod add-on comes in handy for doors that are only painted on one side at the time. This works especially good for final cabinet painting coats.

Knowledgebase

The number one question we get: Are you leaving any marks when spraying both sides?

Always paint the back-side first. On the back-side, apply a light coat of paint, as if the door was sprayed vertically, to avoid drips when turning the door upside down.

Don’t spray the sides yet, grab from the sides with fingers and turn the door around.

The least important part of the door is the back edge. Now the painted side will lay, because of gravity, on the bent rods, resulting in minimum contact on the back edge of the interior side.

Spray the front and the sides. Utilize the grip holders (big or small) to transport. The reason why they are called grip holders is that it allows transporting a totally wet door holding the back edge of the door at a 45° without slipping with minimal marks. Now the doors are ready to be laid on the drying rack remembering to position the rods for the next door.

On the primer coat, is acceptable that you find small marks on the edges. After  2 to 3 coats of paint have been applied, marks that need touchup are very minimal. Any possible marks are only on the backside edge (the least important part) and can be easily touched up. Using a chip or foam brush tap the edge with the tip.

When spraying a semi-gloss or gloss finish it’s nice to load up both sides and not have a thin coat on the inside.

After spraying on both sides the primer and the first finish coat, spray the final coat on each side separately using the top of the spray rack.

 The wooden rods add-on on the 30 Door Dry Rack are perfect to store 50 to 70 doors painted on one side.

Time is being saved by painting the primer and first finish coat on both sides. And completely avoiding any markings by spraying the last coat separately.

Actual job sites

There are many satisfied painting contractors using the Door Rack Painter all over the world.

Since both sides are being painted, the system pays for itself in no-time. Other systems in which you can only store on one side, can drag out your job twice as long.

By painting the cabinet door horizontally on both sides one automatically gets a better finish thanks to gravity on the front side of the door. If the final coat is separately applied it gives the full effect of a horizontal full finish without any marks on both sides.

The ongoing storage problem that every painter encounters with cabinet doors is finally solved. With the Door Rack Painter you could store 100+ doors in half the size of a single garage. Try to hang up 100 doors vertically in a small area like this, impossible. Other storage systems take up a lot more space since you can only paint one side at the time.

There’s no need to install anything, no hooks, no brackets, no strings attached to the doors. You come to the job site, set up, remove the doors, prep and start spraying.

Many painters have shared that the homeowner will comment that they look very professional thanks to the Door Rack Painter, the same goes for paint shops. It immediately organizes your work area and creates a lot more workspace for you.

It is important to wipe down the paint on the spray racks every third to fourth door you paint, with either a moist thinner rag or a moist water rag to avoid paint build up.

PATENTED DESIGN #8066267

Important:

This item is intended for a professional painters that are painting a high volume of doors.

Please make sure to understand the value and benefit in this painting system before buying.

0