This system lets you dry up to ten doors on both sides on top of each other by placing them on wood blocks with long stainless steel screws for easy handling.

We have sold our systems since 2008 to thousands satisfied painters.

Make more money and create more space on your next door painting job!

Door Painting System for doors from 30 to over 100 lbs, paint and dry on both sides at the same time! Patent Pending 15007057

Heavy door painting system for 60 to 100 lbs doors

Self-turning door painting system for 30 to 60 lbs doors.

Purchase Now


USA 2 to 3, maximum 4 days.

Canada 5 to 8 days

International 6 to 12 days.

Weekends are not included in the above estimated shipping days.

The fastest way on how to install the screws its shown in the video below:

default image

The door rack system expedited painting heavy doors and ensured the best quality finish. No more building verticle door racks. I will be purchasing another rack system after seeing how efficient and easy it is to use.

Larry Gianatti LG Painting Telluride, CO August 27, 2016

default image

I have been using the heavy door rack for a bit over a year now and I must say it is a God send. I do a lot of custom repaint jobs and don’t have the space to dry doors like when a house is new and no one lives in it. The door rack saves me space for drying and makes painting all the doors easy. I just ordered another set because of how much it saves me time.

Rick Rojo's Painting Fresno, California May 17, 2017

Click here for more customer reviews
Speed up your production by 50%
The system is built of strong redwood blocks

Learn how this system saves you time and space :

This system lets you paint doors on both sides at the same time, by either installing 2 center blocks that create a swivel system for heavy doors, just like in the video, or by attaching 4 independent blocks where the painters can turn the door by hand, both methods are illustrated in the videos above (horses not included).

The manual turning system, is for lighter doors that can be turned by hand. This system uses four 5" holding screws per door.

The swivel system, creates an easy way of painting both sides of doors that are too heavy to turn. This system uses four 5" holding screws and two 5" swivel screws in the middle per door.

The handle-screws come in 2 sections:
The wood-penetrating screws are inserted only 2 inches and leave a small hole.

Attached to the wood-penetrating screw, is a 5" long stainless steel bolt-screw, that makes transporting the door very easy.

This only needs to be done 5 to 10% of the time if a very heavy coat is required on both sides.

How to spray both sides with a heavy coat of paint

Apply the primer and first coat on both sides just like in the videos. Then, apply a heavy coat on the back side of the doors, store them in the Dry Block System for a day of two. Then, apply a heavy coat on the second side.

  • Placeholder

  • Placeholder
  • Placeholder
  • Placeholder

  • Placeholder
  • Placeholder